Each tile is made with recycled rubber tire crumb. Thanks to it’s raw material source, mostly tires, these rubber play mats have the strength and durability to withstand constant physical impact. Additionally, the recycled rubber contains trace amounts of EPDM rubber, which allows these playground safety tiles to be placed in the outdoors. Tires are made to operate efficiently outdoors, and so will these heavy-duty rubber tiles. They can come into contact with outdoor elements like UV rays, ozone, and moisture without suffering from any immediate damage. Recycled rubber sourced from discarded vehicle tires is an eco-friendly product by virtue of the fact that it removes non-biodegradable rubber materials away from the environment.
In recent years, rubber has become the country’s preferred material to use as a surface for playground areas. These 3-inch thick rubber play mats represent the best rubber playground surfacing that money can buy. They have been tested and cleared for fall heights of up to 7 feet, taller than most adults! If a child falls onto these mats from an elevated height, such as 7 feet off the ground, they will have 3 full inches of rubber to cushion their fall and prevent life-threatening injuries.
Children will be safe and comfortable while playing on this type of rubber playground surfacing due to their cushioned and bouncy feel. The secret behind this is the honeycombed underside on each of these playground safety tiles. The design allows for air pockets that add to the bounce-back effect people experience while standing on these tiles. All this safety and comfort is available in an easy-to-install form.
One of the primary reasons that people prefer these playground surface rubber mats is due to their ease of installation. Each tile mat is designed to interlock with another through the use of interlocking pins. These pins hold the mats together. Thanks to their Do-It-Yourself nature, they help to save extra money because you won’t have to hire expensive professional installers.
The "Eco-Safety" mats for playgrounds combine durability and comfort in an eco-friendly and easy to install form. Whether you have an indoor play area or a large playground in the outdoors, these interlocking tiles will protect and cushion.
Individual tiles sized at 19.5" x 19.5"
Playground safety tiles cleared for 6ft fall heights
Children will have 3-inches of rubber to cushion their falls
Rubber play mats available in unique speckled color options
Cleared for 7 foot fall heights according to ASTM F1292-13 specifications
Easy to clean surface for playground areas, use a wet mop and simple soap
DIY installation saves you the hassle of hiring third-party “professional” help
Made from recycled rubber tires, these interlocking tiles are a playground surfacing solution that is very easy to install. Each tile is an eco-friendly product that is available at an affordable price point. This 3-inch thick tile is available in 2 unique speckled color options. Thanks to the waffled bottom design on the tiles, they provide plenty of cushion and bounce-back whenever pressure is applied on them. Whether you have a large commercial playground or a small residential daycare, these tiles will be the perfect fit for the job!
60% Post-Consumer Recycled Rubber Content
Tiles: 19.5"-inch x 19.5"-inch, 28 lbs. Ramps: 3/8" x 3" x 7.87" x 19.5" Ramps, 10 lbs.
The Eco-Safety tiles possess a superior level of durability thanks to the recycled rubber they are made from. They provide a good degree of anti-fatigue comfort and resilience against physically abrasive impacts. The tire rubber also helps in regards to their durability against outdoor weather factors like UV rays and moisture. The Eco-Safety tiles are durable enough to perhaps outlast your play equipment.
In case your application requires the rubber tiles to be installed permanently in a specific location, the BASF CX-941 Adhesive is available. It allows the tiles to be glued onto wood and concrete surfaces. Installation instructions are available online. Please read the instructions carefully before using the adhesive glue.
ASTM F1292-13 Test Report:
These rubber tiles have been tested and cleared for a maximum critical fall height of 7ft. This safety rating is very important to the health and well-being of children while they play. 7ft. Fall Height Test Report
Plastic connector pins are available for these playground floor tiles. Each pin is 3.5" long and made of hard plastic. The pins are meant to hold the tiles together and in place. Each Eco-Safety tile comes with holes on their four sides where the pins are inserted. The pins facilitate a fast and efficient installation.
Tires are made to withstand extremely harsh outdoor conditions. This is possible thanks to the large amounts of EPDM rubber in them. The EPDM rubber is transferred over to these tiles when the tire rubber is processed into this tile form. The Eco-Safety tiles have inherited the outdoor durability of the tire rubber used to make them, so they are sure to last for very long lengths of time.
Cleaning these playground tiles is a very easy process. For simple indoor cleaning, all one needs is a broom, wet mop, or a vacuum. If outdoors area cleaning is required, a water hose, leaf blower, or brooms are perfect for use. These tiles can also be cleaned with mild household soaps and detergents. Please be aware that caustic agents like bleach should never be used as they can damage and discolor the rubber.
Recycled tire rubber is an environmentally friendly material. The non-biodegradable tires used to make these flooring tiles have been taken out of the ecosystem and put back to use in smart and efficient ways, such as in this flooring option.
3" x 19.5" x 19.5" Tiles or Ramps, Blue Steel or Candy Corn